4/98
Page 5 Copyright 1997-98 Detection Systems, Inc. DS7060-AUS Reference Guide
2SHUDWLQJ*XLGH
• The DS7443 is a 6 zone LED keypad; its LEDs represent the zones of the system.
• The DS7445 is an 8 zone LED keypad; its LEDs represent the zones of the system (LEDs for zones 7 and 8 are
not used).
• The DS7447 is an alpha-numeric LCD keypad.
All three keypads display information on various control panel functions. A built-in sounder is used to annunciate
keystroke entries and as an interior warning device.
Volume Control (DS7445 and DS7447 only): The keypad sounder volume can be adjusted using the [1] and [4]
keys along with the [*] key. Hold the [*] key while pressing the [1] key to increase the volume or the [4] key to
decrease the volume. The volume adjustment does not affect the volume during an alarm.
Backlight Control (DS7447 only): The display backlight intensity can be adjusted using the [3] and [6] keys along
with the [*] key. Hold the [*] while pressing the [3] key to increase brightness or the [6] key to decrease brightness.
NOTE: After the backlight and volume are adjusted, you must arm then disarm the system once to store this
information in the control panel. If power is disconnected before the panel is armed, the backlight and
volume levels return to the default settings.
DS7447 KEYPAD DS7443 KEYPAD DS7445 KEYPAD
This chart will help you understand what each Light/LED represents.
LIGHT OFF FLASHING ON
Armed
(red)
The control panel is disarmed. An exit delay is in progress or an
alarm has occurred.
The control panel is armed and no
alarms have occurred.
Status
(green)
One or more zones are not ready
to arm.
One or more zones are bypassed. All zones are ready to arm.
Power
(green)
The control panel has lost power.
No AC for battery.
Control panel problems. Refer to
Error displays.
Normal operation.
Fire
(red)
There are no fire alarms. A fire zone is in alarm. A fire trouble condition exists.
Perimeter*
(yellow)
The perimeter is not armed. This light will not flash. The perimeter is armed.
Supervisory*
(yellow)
This light will not be sued by the
DS7060.
Not used. Not used.
Bell Silenced*
(yellow)
The bells do not need to be or
have not been silenced.
This light will not flash. The bells have been silenced. To
clear, enter the Fire Reset command.
Trouble*
(yellow)
There are no trouble conditions. This light will not flash. A trouble condition exists.
Zone LEDs**
(red)
There are no zone alarms. A zone (1-6) is in alarm. A zone (1-6) is not ready to arm or if
a fire zone, a trouble condition exists.
* = This light is present on the DS7445 only. ** = This light is present on the DS7443 and DS7445.
(48 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels