Detection Systems DS7092 Spécifications télécharger pdf (Page 133)

(a)

breaks in the cables near this con-

(3) Reassemble the 18-tertinal con-

nector. Figure 20 is a cable wiring

nector as follows:

diagram and exploded view of the

(a) Place the cables in the grooves

CX-7899/VRM-l.

provided in the connector shell.

Disassemble the 18-terminal con-

(b) Slide the connector clamp over

nector as follows:

the cables and under the female

(a) Remove four screws.

connector.

(b) Remove the connector shell.

and replace and tighten the four

from the female connector.

screws.

Figure 18. Test Set, Radio TS-1777/VRM-1 case with

front panel and chassis removed.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 180 181

Pas de commentaire

Detection Systems DS7092 Spécifications Page 133